Can you wash venetian blinds




















All you need are some simple tools and a few minutes to improve your view. Learn how to clean blinds quickly and easily, and add this simple method to your regular list of cleaning to-dos.

Begin by fully lowering the blinds. Wood and faux-wood blinds can be completely closed; the slats of vinyl and aluminum blinds, which often overlap, should be tilted downward but not completely closed. For vertical blinds, hold the bottom of the blind in one hand to stabilize it. Wipe the blinds with a microfiber cloth, starting from the top and working your way down. Wipe in a downward motion or they could come unhooked. You can also use your vacuum cleaner with a soft dusting brush attachment and a low-suction setting to remove dust.

For horizontal blinds, the process is exactly the same except that you wipe from side to side. Take this time to dust the headrail with a damp cloth. You can also use a silicone-based spray in the grooves to ensure it keeps operating smoothly.

It must not be hot or above 30 degrees C 86F. If you have a hanging blind with a weight on the bottom, this section is held together with glue which hot water will damage and break that seal. Do not let the curtains soak in the water. The soaking can cause them to shrink and lose their fire-retardant additive. Do not hang them to dry, because this can stretch them and by sticking them in the dryer can shrink them. Always leave them to dry fully before rehanging, so they keep their shape.

If water spots are a concern, you can use a hair dryer on a low heat setting to quickly go over it. When they are completely dry, hang them back up on your beautiful, clean headrail! Light cleaning your Venetian blinds is extremely simple and easy to do. To maintain your blinds and keep them looking fresh, we recommend a light clean as regularly as possible. Doing this will mean that you will not have to deep clean them as regularly.

The simplest way to clean Venetian blinds is to dust the slats with a feather or fluffy dusty. To make sure you remove all of the dust and dirt, you should dust each individual slat with a dry or damp cloth. You can also get hold of specific Venetian blind cleaner at many retailers too. Before you start, check the blind for sticky stains and remove them using a mild detergent or cleaning spray and then dry the blind.

Move the blinds into the closed position and clean each slat, starting from the middle and wiping outwards. To make life easier, you can use a vacuum cleaner with an upholstery attachment. Without the attachment, you risk scratching or damaging the blind. Double check how powerful your hoover is because the suction can pull the slats out of shape.

In order to prevent your blind from becoming scratched or damaged, lay a groundsheet or blackout down. Carefully remove your blind from the window and lay it down over your prepared area. Fill a bucket with warm water and a mild detergent, and use a soft brush or nonabrasive sponge to gently clean each slat. Rinse the blind with cold water — for more stubborn stains, you may need to repeat the process. Many of us are guilty of putting off or even forgetting to clean our blinds, which means that dust and grime can often build-up without us realising , and the cleaning process can end up becoming much more difficult than planned.

Their slatted design makes it easy for dirt to go unnoticed and also makes them trickier to clean. Follow our advice on cleaning your slatted blinds, and it should only take a few minutes to get them looking as good as new To get rid of excess dust from the surfaces, all you need is a cloth or feather duster.

Work your way across the panels, making sure you clean them one by one to get rid of as much dust as possible.



0コメント

  • 1000 / 1000