Hi JRRed , Apologies for any frustration caused. Thanks, Jason. Report Inappropriate Content Message 4 of April Hi, Thanks for that. A one day hitch that has righted itself. Report Inappropriate Content Message 5 of Report Inappropriate Content Message 6 of Jacob Newbie. Report Inappropriate Content Message 7 of Reply 1 Like. Welcome, Jason. Report Inappropriate Content Message 8 of June Hi, Thank you so much for the advice re-resurfacing my front porch.
Looking east Looking west. Report Inappropriate Content Message 9 of Hi JRRed , What a great transformation! What product did you end up going with? Many thanks for sharing the update with us. Report Inappropriate Content Message 10 of Why join the Bunnings Workshop community? Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects Be inspired by member projects Ask your D.
You might also like. Jjoo Budding Contributor. Recycled pallet kids mud kitchen. Brad Trusted Contributor. Dog-friendly garden screening. How do I do an adhesion test? You get some new masking tape preferably a 30 to 50mm wide tape ; cut about 3 or 4 pieces off at about mm long.
Apply about mm of each piece of masking tape onto the test patch and about 50mm of the tape onto the bare concrete driveway or path, leaving about 50mm sticking up so that you can grab hold of it. Firmly rub the masking tape onto the test patch and the old part of the driveway of path, this will ensure that the masking tape is well stuck. Now grab a hold of the part of the tape that is sticking up and peel the tape of the driveway or path and test patch with a quick ripping motion.
Carry out this process with all 3 or 4 pieces. Now, examine the pieces of tape to see of there is any evidence of the coatings on the tape and also examine the test patch to see if you can see if the masking tape has removed any of the coatings.
If it hasn't removed any of the sealer then you are achieving a good adhesion onto the existing coating, you can now proceed with coating the whole driveway or path. If it has removed some of the coating, you will have to either mechanically rough the existing surface of the coating by using sand paper, either by hand or powered sanding machine. If you need to do some extra preparation due to the coating not adhering then once you have done the preparation, do another test patch, following the procedures mentioned above, until you get a satisfactory result.
Then, proceed with the application below to your whole job. Allow approximately 2 hours to dry, depending on weather. It needs to be touch dry so that you can walk on it without it lifting by sticking to your shoes. If you are happy with your joints being the existing colour and texture of the concrete, or you do not want to use any stencilling or tape, then you can move onto the next step. This also will require longer time for drying between coats due to the extra thickness in the low points.
Allow at least 2 hours drying time, overnight drying time or longer is recommended if going over exposed aggregate, Pebblecrete, bitumen, you are experiencing cold weather or when concrete is in shady areas, before applying the Patterned Stencil or Stencil Tape lines, tape will not stick if not completely dry.
No spaces allowed. Pebblecrete drive and patio — reno, to keep or alternatives. Search for:. Viewing 8 posts - 1 through 8 of 8 total. May 18, - am.
Hi, We have a Pebblecrete drive and patio. Thanks Jason. Scott No Mates Participant. Tools Participant. May 19, - am. Jason said he has pebblecrete,not exposed aggregate. They are completely different things. May 20, - am. May 21, - am. Stella Member. Schedule a Free Quote : info sydneywidespraypave. Concrete Resurfacing. Grind entire surface to remove if any sealer, paint, previous spray pave, soft chalky surface or any existing product from the surface.
Chase any existing cracks in the concrete in preparation for filling. High pressure wash with acid to etch surface making it more porous. Fill in cracks with the latest technology repairing agent.
0コメント